Discrete-Time Signals and Systems

A discrete-time signal is represented symbolically as s n , where n … -1 0 1 … .

The discrete-time cosine signal is plotted as a stem plot. Can you find the formula for this signal? We usually draw discrete-time signals as stem plots to emphasize the fact they are functions defined only on the integers. We can delay a discrete-time signal by an integer just as with analog ones. A signal delayed by m samples has the expression s n m .

The most important signal is, of course, the complex exponential sequence.

Note that the frequency variable f is dimensionless and that adding an integer to the frequency of the discrete-time complex exponential has no effect on the signal's value. This derivation follows because the complex exponential evaluated at an integer multiple of 2 equals one. Thus, we need only consider frequency to have a value in some unit-length interval.

Discrete-time sinusoids have the obvious form s n A 2 f n φ . As opposed to analog complex exponentials and sinusoids that can have their frequencies be any real value, frequencies of their discrete-time counterparts yield unique waveforms only when f lies in the interval 1 2 1 2 . This choice of frequency interval is arbitrary; we can also choose the frequency to lie in the interval 0 1 . How to choose a unit-length interval for a sinusoid's frequency will become evident later.

The second-most important discrete-time signal is the unit sample, which is defined to be

The unit sample. Examination of a discrete-time signal's plot, like that of the cosine signal shown in [link], reveals that all signals consist of a sequence of delayed and scaled unit samples. Because the value of a sequence at each integer m is denoted by s m and the unit sample delayed to occur at m is written δ n m , we can decompose any signal as a sum of unit samples delayed to the appropriate location and scaled by the signal value. This kind of decomposition is unique to discrete-time signals, and will prove useful subsequently.

The unit sample in discrete-time is well-defined at the origin, as opposed to the situation with analog signals.

An interesting aspect of discrete-time signals is that their values do not need to be real numbers. We do have real-valued discrete-time signals like the sinusoid, but we also have signals that denote the sequence of characters typed on the keyboard. Such characters certainly aren't real numbers, and as a collection of possible signal values, they have little mathematical structure other than that they are members of a set. More formally, each element of the symbolic-valued signal s n takes on one of the values a 1 … a K which comprise the alphabet A . This technical terminology does not mean we restrict symbols to being members of the English or Greek alphabet. They could represent keyboard characters, bytes (8-bit quantities), integers that convey daily temperature. Whether controlled by software or not, discrete-time systems are ultimately constructed from digital circuits, which consist entirely of analog circuit elements. Furthermore, the transmission and reception of discrete-time signals, like e-mail, is accomplished with analog signals and systems. Understanding how discrete-time and analog signals and systems intertwine is perhaps the main goal of this course.

Discrete-time systems can act on discrete-time signals in ways similar to those found in analog signals and systems. Because of the role of software in discrete-time systems, many more different systems can be envisioned and "constructed" with programs than can be with analog signals. In fact, a special class of analog signals can be converted into discrete-time signals, processed with software, and converted back into an analog signal, all without the incursion of error. For such signals, systems can be easily produced in software, with equivalent analog realizations difficult, if not impossible, to design.